Industry Frontier

Suzhou Kotler Precision Machinery Co., Ltd. has been engaged in the plastic machinery industry for more than 10 years, specializing in the producti...

For non Newtonian fluids, the volumetric flow rate Q (metering section flow rate) of the extruder is directly proportional to the screw speed.

The screw of an injection molding machine works for a long time in high temperature, high pressure, high mechanical torque, and high friction envir...

Extruder is one of the commonly used machinery in the plastic industry. In order to maintain the plastic extruder in good working condition and ens...

During the continuous operation of the extrusion screw, the internal parts cannot avoid wear and tear, which directly leads to a decrease in produc...

The injection molding machine barrel is a key component in this process, as it is the place where plastic particles melt and adjust before injection.

The extruder barrel is a long cylindrical metal tube used in plastic extrusion processes. It is equipped with one or more screws, which rotate and ...

Chemical corrosion, the corroded metal material is iron. Common corrosive plastics include flame retardant plastics, acidic plastics, polyvinyl chl...

Do not start the machine until the screw reaches the preset temperature.

Regularly clean the surface of the screw to eliminate substances such as plastic hot melt and wear, which helps the screw to operate normally.

Apply high-temperature anti-corrosion paste evenly to the threads of the bolts and the ribbed surface of the screw heads to prevent them from being...

A circuit malfunction is a situation where the screw of the injection molding machine does not rotate. It may be caused by damage or poor contact o...